en-UShy-AMru-RU

DS-2CD6026FHWD-(A)

$0.00
2MP Ultra Low-light Box Network Camera

Description

Camera
Image Sensor: 1/1.8" Progressive Scan CMOS 
Signal System: PAL/NTSC
Min. Illumination: Color: 0.001 Lux @ (F1.2, AGC ON)
B/W: 0.0001 Lux @ (F1.2, AGC ON)
Shutter time: 1/1 s to 1/100,000 s
Slow shutter: Support
Lens Mount: C/CS mount
Auto Iris: DC drive
Day& Night: IR cut filter with auto switch
Wide Dynamic Range: 120 dB
Focus: ABF(-A model)
  

Compression Standard
Video Compression: H.264/MPEG4/MJPEG
H.264 code profile: Baseline Profile / Main Profile / High Profile
Video bit rate: 32Kbps~16Mbps
Audio Compression: G.711/G.722.1/G.726/MP2L2
Audio bit rate: 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)
Triple Streams: Yes

Image
Max. Image Resolution: 1920 x 1080
Frame Rate: 50Hz:50fps(1920×1080), 50fps(1280×960), 50fps(1280×720)
60Hz:60fps(1920×1080), 60fps(1280×960), 60fps(1280×720)
Third Stream: Independent with Main Stream and Sub Stream, up to 
50Hz: 25fps (1920 × 1080) 
60Hz: 30fps (1920 × 1080)
Image Enhancement: BLC/3D DNR/ROI/Defog/EIS
Image Settings: Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser
Regional Cropping: Support
Picture Overlay: LOGO picture can be overlaid on video with 128x128 24bit bmp format
Day/Night Switch: Auto/Schedule/Triggered by Alarm In

Network
Network Storage: Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS)
Alarm Trigger: Line crossing detection, Intrusion detection, Defocus detection, Scene change detection, Motion detection, Face detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception
Protocols: TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour
Security: User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask
System Compatibility: ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI

Interface
Audio Input: 1-ch 3.5 mm audio interface, Mic in/Line in. 1 built-in Microphone
Audio Output: 1-ch 3.5mm audio interface (line level, 600 Ω)
Communication Interface: 1 RJ45 10M/100M Ethernet port, 1 RS-485 interface and 1 RS-232 interface
Alarm: 1 input, 1 output (up to DC24V 1A or AC110V 500mA) 
Video Output: 1Vp-p Composite Output (75 Ω, BNC)
On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button: Yes

Audio
Environment Noise Filtering: Support
Audio I/O: Support dual audio track, stereo
Audio Sampling Rate: 16kHz / 32kHz / 44.1kHz / 48kHz

Smart Feature-set
Behavior Analysis: Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection: Cross a pre-defined virtual line
Intrusion Detection: Enter and loiter in a pre-defined virtual region
Region Entrance: Enter a pre-defined virtual region from the outside place
Region Exiting: Exit from a pre-defined virtual region
Unattended Baggage: Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal: Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections: Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection
Recognition: Face detection recognition
Statistics: Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)

General
Operating Conditions: -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply: 24VAC± 10%, 12 VDC ± 10%, PoE (802.3af)
Power Consumption: Max. 6 W (Max. 9W with IR cut filter on)
Dimensions: 69.8×58×145 mm (2.75” × 2.28” × 5.71”)
Weight: 830 g (1.83 lbs)


Models

$0.00 $0.00